NEW Introduction, now with dimming  function. The dSready IC TLS019-300 is a capacitive Digital Strom pushbutton with 300 dS technology. It can be mounted invisibly from the outside in a cabinet or under a table. If a hand is brought to the plate / material carrier from the outside, a telegram is sent to the dS system.The TLS019 is glued to the carrier material such as wood, glass, plastic or smooth ceramics with the high-quality adhesive surface. After plugging in the supply voltage (Euro plug), it is calibrated to the carrier material within 3 seconds and then logged on to the dS system. Material penetration wood approx. 10-30 mm, glass approx. 7 mm, plastic approx. 7 mm, ceramics approx. 5 mm. Very flat design with a thickness of 8.5 mm and a diameter of 54 mm. Connection cable 1.5 meters with Euro plug.

The "IC GE-ZWD300" Euro adapter is designed for plug & play connection of consumers to a Digital Strom system. For example Movable lights, fairy lights or Christmas lights can be quickly plugged into a dS system. Due to its small dimensions, the product fits into many sockets worldwide without covering neighboring sockets. The dSready product contains the latest GE / 300 Digital Strom technology. This is characterized by low self-consumption (less than 0.2 watts) and leading / trailing edge dimming. More data in the PDF product data sheet above.

The "IC ST-DIM300" adapter is designed for the plug & play connection of consumers to a Digital Strom system. For example Movable lights or Christmas lights can be quickly plugged into a dS system. The product can also be operated directly using an integrated button and a status LED. The dSready product contains the latest GE / 300 Digital Strom technology. 360 allaround Video Industrielle Computertechnik (@industriellecomputertechnik) • Instagram-Fotos und -Videos More data in the PDF product data sheet above.

The "IC BW-HS 300" is a Digital Strom double sensor, it is both a motion detector (approx. 180 degree detection) and a brightness sensor (approx. 20-6500 lux detection). The dS ready product transfers the values ​​directly into the digitalSTROM system using the latest dS 300 technology. This enables individual safety and comfort functions to be triggered. The light detection is set by means of a potentiometer. Noiseless switching process (no click clack) thanks to the use of the latest semiconductor technology. The product delivery consists of the double sensor upper part in 55 mm format with support ring and the base module for installation in the flush-mounted box. The tops are suitable for the GIRA switch series E2, E3, Event, Esprit and Classix. The outer frame of the respective switch series is not included in the scope of delivery.

The "IC Alarm 400" module is designed to convert up to four low-voltage signals to the Digital Strom system. This means that 4 window contacts, broken glass or water sensors can be wired (closed-circuit principle) The "IC Alarm 400" module is designed to convert up to four low-voltage signals to the digitalSTROM system. This allows 4 window contacts, broken glass or water sensors to be monitored by wire. The 12 volt DC line voltage is generated in the module itself. Installation is in a standard flush-mounted box. The integrated technology of the SW-SKM300 terminal translates the states of the four lines into the Digital Strom system. Thus, each contact / sensor can be given an exact local assignment. The product is dS ready.

Smart Home dSready pushbutton with fully integrated Digital Strom technology and load output (switching and dimming) 150 watts on board. As a result of the fact that the IC T23-GE is only slightly higher in construction than a standard GIRA pushbutton, installation in a standard flush-mounted box is very easy. Only L and N and the output to the light source are connected via integrated spring plug-in terminals, which considerably shortens the installation time on site. The rocker switch acts directly on the integrated dS electronics. The functionality corresponds to the dS terminal GE-TKM300. The buttons are suitable for the rockers and frames of the GIRA switch series E2, E3, Event, Esprit and Classix.

The dSready module "IC T8L-LED" is designed for installation in a deep wall socket in conjunction with the Gira Tastsensor series 4. The module is individually connected to the probe sensor by means of a ribbon cable. The 8 operation points are designed black as jokers in the dS system and can therefore be used for all functions in the dS system. When the 8 buttons are pressed, the LED belonging to the push-button rocker lights up. 

The "IC Power Digital Strom Modul" is a small powerhouse. As an dSready power module, it fits into the smallest European flush-mounted box and switches powers up to 2875 watts / AC1 and up to 700 VA / AC15. In conjunction with a Schukosteckdose it fits into a 66er mounted box. The switching state is indicated by an LED. The module incorporates the latest integrated technology of the GE-KM300 series and has a P-standby of less than 0.2W. Videolink Industrielle Computertechnik (@industriellecomputertechnik) • Instagram-Fotos und -Videos